CDL Oral Simulator

Pre-trip and vehicle inspection

Pre-Trip Inspection Skills Test: CDL oral exam study guide

Study the CDL pre-trip inspection skills test: required procedure, what to say, critical items, and common failure points.

Practice this topic free One free full exam per device, no sign-up.

What the examiner is checking

The pre-trip inspection skills test requires the CDL candidate to approach, inspect, and explain safety-critical vehicle components in a logical order. The examiner does not just watch — they evaluate whether the candidate can identify defects, name what is being checked, and explain why the condition is safe or unsafe.

Step by step

  1. Start at the front of the vehicle: approach and assess overall condition visually before touching anything.
  2. Engine compartment check: Inspect belts, fluid levels, battery connections, and obvious leaks.
  3. Front of vehicle: Check headlights, turn signals, grille, bumper, and windshield for cracks or damage.
  4. Cab interior: Verify seat belt function, horn, windshield wipers, mirrors (adjust if needed), and gauge cluster for warning lights.
  5. Left-front wheel area: Check tire condition (tread depth, sidewall damage), wheel and rim condition, and lug nuts.
  6. Left-front axle and brake: From the wheel area, inspect the brake chamber, slack adjuster, air hoses, and brake drum and linings for damage, leaks, and loose or missing parts.
  7. Left side of vehicle: Check running lights, clearance lights, reflective tape, and trailer connection (on combination vehicles).
  8. Rear of vehicle: Inspect tail lights, brake lights, turn signals, reflective devices, and license plate.
  9. Right-front wheel and axle: Mirror the left-front inspection.
  10. Right side of vehicle: Check passenger-side lights, reflective tape, and cargo security (on cargo vehicles).
  11. Under vehicle: Check for fuel, oil, or coolant leaks on the ground.
  12. Rear axle and brake assemblies: Inspect brake chambers, slack adjusters, and air lines.
  13. Coupling/landing gear (combination vehicles): Verify fifth wheel, kingpin, air and electrical connections, and landing gear condition.
  14. Final verification: Start the engine, allow air pressure to build, test service brakes, and verify the parking brake.

Why it matters

The pre-trip inspection catches defects before they cause an incident on the road. A tire at the legal minimum tread (4/32 inch on a steer tire, 2/32 inch on others) can still be unsafe in wet conditions. A cracked windshield can shatter from a stone impact. A loose brake chamber can separate and disable the brakes on that wheel. The pre-trip inspection is the driver's last safety check before sharing the road with the public.

Sources

  • 49 CFR 383.113(a) - Pre-trip vehicle inspection
  • FMCSA 2005 CDL Driver Manual, Section 11 - Vehicle Inspection Test
  • New York State CDL Manual, Section 11 mapping

Related topics

Say it out loud, like test day

Reading is not the same as answering an examiner. Rehearse this topic out loud and get pushed on what you skip.

Practice this topic free Browse all topics